Creo Tutorials

Creo Tutorials

About the blog:

New Creo Parametric tutorials to showcase the new features, functions, configuration, renderings and animation with best practice, tips and tricks. You can find more on YouTube.com

Repeat Region: Piping parameters

Tips and TricksPosted by Ing. Vladimir Palffy Thu, June 22, 2017 10:34AM

Linestock Parameters:

Parameter Name

Definition

&asm.mbr.pipe.stock.name

Lists name(s) of line stock(s).

&asm.mbr.pipe.stock.User Defined

Lists specified parameters for the line stock.

&asm.mbr.pipe.stock.line.name

Lists names of all pipelines using each line stock.

&asm.mbr.pipe.stock.line.User Defined

Lists parameters for the pipeline using the specified line stock.

&asm.mbr.pipe.stock.material

Lists material for all line stocks.

&asm.mbr.pipe.stock.OD

Lists outer diameter for line stocks.

&asm.mbr.pipe.stock.wallthick

Lists wall thickness for line stocks.

&asm.mbr.pipe.stock.len.pre_cut

Lists total precut length of each line stock.

&asm.mbr.pipe.stock.len.center

Lists total centerline length of each line stock.

Pipeline Parameters:

Parameter Name

Definition

&asm.mbr.pipe.line.segment.stock.name

Lists names of line stocks for each segment in the pipeline.

&asm.mbr.pipe.line.segment.stock.User Defined

Lists parameters for line stocks of which the pipeline is made.

&asm.mbr.pipe.line.name

Lists names of all pipelines.

&asm.mbr.pipe.line.User Defined

Lists parameters for each pipeline.

&asm.mbr.pipe.line.stock.name

Lists names of line stocks used in each pipeline.

&asm.mbr.pipe.line.stock.User Defined

Lists parameters for line stocks used in pipeline.

&asm.mbr.pipe.line.len.pre_cut

Lists precut length of each pipeline.

&asm.mbr.pipe.line.len.center

Lists centerline length of each pipeline.

&asm.mbr.pipe.line.segment.name

Lists names of all segments in pipeline.

&asm.mbr.pipe.line.segment.solid_name

Lists names of all solids (if defined) in pipeline.

&asm.mbr.pipe.line.segment.len.pre_cut

Lists precut length of segments in pipeline.

&asm.mbr.pipe.line.segment.len.center

Lists centerline length of segments in pipeline.

&asm.mbr.pipe.line.segment.clk_ang.ang

Lists clocking angle value from evaluate feature.

&asm.mbr.pipe.line.segment.clk_ang.cs1

Lists name of initial coordinate system for each clocking angle.

&asm.mbr.pipe.line.segment.clk_ang.cs2

Lists name of final coordinate system for each clocking angle.

User Defined Parameters:

The following Line Stock parameters are displayed as User Defined parameters.

• STOCKNO
• MATERIAL
• GRADE
• X_SECTION_TYPE (rectangular or circular)
• SECTION_TYPE (hollow or solid)
• RECTANGULAR_HEIGHT
• RECTANGULAR_WIDTH
• RECTANGULAR_ANGLE
• OD
• WALL_THICKNESS
• SHAPE (straight OR flexible)
• CORNER_TYPES (fitting, bend, or miter cut)
• WT_LEN (weight/length)
• BEND_RADIUS
• BEND_ANGLE
• MITTER_CUT_LEN
• MITER_CUT_NUM

The following Design Rule parameters are displayed as User Defined parameters

• MAX_OVERALL_LENGTH
• MIN_SEGMENT_LENGTH
• MAX_SEGMENT_LENGTH
• MAX_NUMBER_BENDS
• MIN_BEND_SEPARATION
• MIN_STRAIGHT_LENGTH_END
• MIN_BEND_RADIUS
• MAX_BEND_RADIUS
• MIN_BEND_ANGLE
• MAX_BEND_ANGLE
• BEND_ARC_THRESHOLD
• MIN_BRANCH_SEPARATION
• MIN_BRANCH_ANGLE
• BEND_TABLE_NAME

Pipe Segment Parameters:

Parameter Name

Definition

&asm.mbr.pipe.segment.name

Lists system default name of the pipeline segments.

&asm.mbr.pipe.segment.solid_name

Lists solid part name for each segment (if defined).

&asm.mbr.pipe.segment.stock.name

Lists line stock used in each segment.

&asm.mbr.pipe.segment.stock.User Defined

Lists parameters in line stocks assigned to each segment.

&asm.mbr.pipe.segment.line.name

Lists name of pipeline to which each segment belongs.

&asm.mbr.pipe.segment.line.User Defined

Lists pipeline parameters for each segment.

&asm.mbr.pipe.segment.len.pre_cut

Lists precut length of each segment.

&asm.mbr.pipe.segment.len.center

Lists centerline length of each segment.

&asm.mbr.pipe.segment.segfrom

Lists location from which each pipeline segment in the assembly is routed. This is the component to which the from entry port belongs.

&asm.mbr.pipe.segment.segto

Lists the location to which each pipeline segment in the assembly is routed. This is the component to which the to entry port belongs.

&asm.mbr.pipe.segment.clk_ang.ang

Lists clocking angle value of evaluate feature.

&asm.mbr.pipe.segment.clk_ang.cs1

Lists name of initial coordinate system for each clocking angle.

&asm.mbr.pipe.segment.clk_ang.cs2

Lists name of final coordinate system for each clocking angle.

Pipeline Segment Bend Information Parameters:

Parameter Name

Definition

&asm.mbr.pipe.segment.csys.bend.User Defined

Lists a user-defined bend parameter.

&asm.mbr.pipe.segment.csys.bend.bend_name

Lists the bend name created by the system.

&asm.mbr.pipe.segment.csys.bend.loc_angle

Lists bend angle.

&asm.mbr.pipe.segment.csys.bend.loc_num

Lists bend location bend number.

&asm.mbr.pipe.segment.csys.bend.loc_radius

Lists bend radius.

&asm.mbr.pipe.segment.csys.bend.loc_x

Lists x-offset bend location information.

&asm.mbr.pipe.segment.csys.bend.loc_y

Lists y-offset bend location information.

&asm.mbr.pipe.segment.csys.bend.loc_z

Lists z-offset bend location information.

&asm.mbr.pipe.segment.csys.bend.mach_bend

Lists bend machine bend angle.

&asm.mbr.pipe.segment.csys.bend.mach_num

Lists bend machine bend number.

&asm.mbr.pipe.segment.csys.bend.mach_offset

Lists bend machine offset.

&asm.mbr.pipe.segment.csys.bend.mach_radius

Lists bend machine bend radius.

&asm.mbr.pipe.segment.csys.bend.mach_twist

Lists bend machine twist angle.

&asm.mbr.pipe.segment.csys.name

Lists coordinate system name for segment bend information.

&asm.mbr.pipe.segment.mach_csys.bend.User Defined

Lists a user-defined bend parameter.

&asm.mbr.pipe.segment.mach_csys.bend.bend_name

Lists the bend name created by the system.

&asm.mbr.pipe.segment.mach_csys.bend.mach_bend

Lists bend machine bend angle.

&asm.mbr.pipe.segment.mach_csys.bend.mach_num

Lists bend machine number.

&asm.mbr.pipe.segment.mach_csys.bend.mach_offset

Lists bend machine offset.

&asm.mbr.pipe.segment.mach_csys.bend.mach_radius

Lists bend machine radius.

&asm.mbr.pipe.segment.mach_csys.bend.mach_twist

Lists bend machine twist angle.

&asm.mbr.pipe.segment.mach_csys.name

Lists name of coordinate system with bend machine information.

&asm.mbr.pipe.segment.loc_csys.bend.User Defined

Lists a user-defined bend parameter.

&asm.mbr.pipe.segment.loc_csys.bend.bend_name

Lists the bend name created by the system.

&asm.mbr.pipe.segment.loc_csys.bend.loc_angle

Lists bend location bend angle.

&asm.mbr.pipe.segment.loc_csys.bend.loc_num

Shows bend location bend number.

&asm.mbr.pipe.segment.loc_csys.bend.loc_radius

Lists bend location bend radius.

&asm.mbr.pipe.segment.loc_csys.bend.loc_x

Lists x-offset bend location information.

&asm.mbr.pipe.segment.loc_csys.bend.loc_y

Lists y-offset bend location information.

&asm.mbr.pipe.segment.loc_csys.bend.loc_z

Lists z-offset bend location information.

&asm.mbr.pipe.segment.loc_csys.name

Lists coordinate system name for segment bend location information.

Holes Report Parameters:

Parameter Name

Definition

&asm.mbr.pipe.segment.holes.holes_params.hole_num

List holes report number.

&asm.mbr.pipe.segment.holes.holes_params.hole_offset

List holes report offset.

&asm.mbr.pipe.segment.holes.holes_params.hole_angle

List holes report angle.

&asm.mbr.pipe.segment.holes.holes_param..hole_diam

List holes report diameter.







  • Comments(0)//creo-tutorials.4kside.com/#post151